A* Graph Search Project
Revision as of 06:49, 2 April 2018
This page describes the A* Graph Search Project from the Coursera course "Modern Robotics, Course 4: Robot Motion Planning and Control."
Downloading and testing the needed V-REP files
First you should read about the V-REP simulator scene "CSV Motion Planning Kilobot" on the Modern Robotics wiki. You should then download the associated .ttt V-REP scene file and the .zip file with sample input to the scene. When you extract the .zip file, you will have a folder with four files inside: nodes.csv (describing the nodes of the graph), edges.csv (describing the edges of the graph), path.csv (describing a solution path), and obstacles.csv (describing cylindrical obstacles, just for visualization purposes). Read the wiki (and the files themselves, which have comments) for more information on the formats of these files.
Play the scene in V-REP and choose the folder with the four files as the input. When you press the "play" button on the interface, you will see a display of the graph, the obstacles, and a path through the graph. You will also see a small mobile robot, a swarm robot called a kilobot, travel along the path. Make sure you can do this before moving on with the rest of the assignment.
In this assignment, you will create a program that implements A* search to find a minimum-cost path through an undirected graph. You will use the V-REP scene to visualize the graph and the solution path found by your program. Although the nodes of your graph are assigned (x,y) coordinates in a plane for visualization purposes (and the solution is animated by a planar mobile robot), the A* graph search you will implement is for fully general undirected weighted graphs. As such, the nodes could represent configurations in arbitrary C-spaces, such as the six-dimensional C-space of the rigid chassis of a spacecraft flying among asteroids. We visualize the nodes of the graph as points in a plane, for simplicity.
Writing your program
You will write a program that takes two files as input, nodes.csv and edges.csv, and produces a single file as output, path.csv. You can test your program on the nodes.csv and edges.csv file that you downloaded from the Modern Robotics wiki, to make sure that your code is working properly.
The sample nodes.csv and edges.csv files on the wiki have comments in them. All lines beginning with the hashtag character # are ignored. You can write your software to handle comments such as these, or you can assume that the input files have no comments. In the latter case, you will need to delete the comments from the nodes.csv and edges.csv file before using them to test your code.
You can write your program in any language, provided it is clearly structured, reasonably modular, easy to understand for a reader, and with sufficient comments. Your program can span multiple files, or it can be a single file, if appropriate.
If there are N nodes, numbered 1...N in nodes.csv, you can assume that node 1 is the start node and node N is the goal node. Your output file path.csv should be a single line of the form
1, node2, node3, ..., N
indicating that the solution path goes from nodes numbered 1, to node2, to node3, etc., finally to N. Your program must find the proper node numbers for node2, node3, etc. The solution path should minimize the sum of the edge costs among all possible paths from node 1 to node N, where the edge costs are given in the edges.csv file. If there is no solution, your output file can be simply
indicating that the robot does not go anywhere.
To see the results of your planner, call the V-REP scene with the nodes.csv and edges.csv file you used as input, the path.csv file that your program wrote as output, and an obstacles.csv file (which is not needed by your program). The obstacles .csv file can be empty if you don't want to visualize obstacles.
Data structures, algorithms, and computational efficiency
This project is a more extensive programming project than you have seen before. If you have taken courses in data structures and algorithms, you will have an advantage. If not, you should still be able to complete the project based on the A* description in the book.
What to submit
Once your program is producing correct output, you are ready to assemble your documents for submission. You will submit a single .zip file of a directory with the following contents:
- Your commented code in a directory called "code." Your code should be lightly commented, so it is clear to the reader what the code is doing. No need to go overboard, but keep in mind your reviewer may not be fluent in your programming language. Your code comments must include an example of how to use the code. You can write your program in any language, provided it is clearly structured, reasonably modular, easy to understand for a reader, and with sufficient comments. Your program can span multiple files, or it can be a single file, if appropriate. If your code is in Mathematica, turn in (a) your .nb notebook file and (b) a .pdf printout of your code, so a reviewer can read your code without having to have the Mathematica software.
- A directory called "results" with four files in it: nodes.csv, edges.csv, obstacles.csv, and path.csv. The nodes.csv file and edges.csv file should be readable by your program. The nodes.csv file should be identical to the sample nodes.csv file you downloaded, except you can delete the comments if your code does not handle files with comments. The edges.csv file should also be identical to the sample edges.csv file (perhaps without the comments) except the edge from node 4 to node 7 should be deleted, to change the graph from the original graph. The obstacles.csv file should be identical to the sample file. The path.csv file should be the unmodified output of your program.
- A V-REP video animating your solution path on the graph from the bullet above. (See the V-REP description in Week 1 of Course 1, or go directly to V-REP Introduction, to learn about making videos with V-REP.) Your video should be a "reasonable" size (e.g., a few MB, less than 10 MB) and use a standard codec (e.g., some variant of .mp4) that others can view. Your video should be taken from a virtual camera angle that makes it easy to see the graph and kilobot motion.
- (OPTIONAL) A plain text file called "README.txt." This has any other information that may help the reviewer understand your submission.