Difference between revisions of "**OBSOLETE** Getting Started with PIC32 and UBW32"
Andrew Long (talk | contribs) |
Andrew Long (talk | contribs) |
||
| Line 18: | Line 18: | ||
The HID bootloader v2.4 executable can be downloaded [[Media:HID_Bootloader_v2_4.zip| '''here''']]. |
The HID bootloader v2.4 executable can be downloaded [[Media:HID_Bootloader_v2_4.zip| '''here''']]. |
||
This bootloader is used to put HEX files on the PIC32. |
|||
NOTE: occassionally, the bootloader will get stuck verifying that the program is running. (There must be a bug in the bootloader application code) It will take 90-100% of CPU. End task manually with the task manager if this happens. |
|||
= Firmware = |
= Firmware = |
||
Revision as of 17:01, 9 July 2009
Follow these steps to get the UBW32 started.
Driver for UBW32
Download the driver to your computer from here.
Plug a miniUSB cord into the UBW32 and into the computer.
The New Hardware Wizard should appear. The driver is for a COM PORT. Complete wizard and select driver you downloaded.
The UBW32 should now communicate with the computer.
Open a terminal (I used HyperTerminal) and type 'v'. The Firmware version should appear.
Bootloader
An advantage of the UBW32 is that a bootloader has already been installed. This means you do not need to a programmer to put new programs on the PIC32.
The HID bootloader v2.4 executable can be downloaded here.
This bootloader is used to put HEX files on the PIC32.
NOTE: occassionally, the bootloader will get stuck verifying that the program is running. (There must be a bug in the bootloader application code) It will take 90-100% of CPU. End task manually with the task manager if this happens.
